Configuration Remote Host by using Netsarang (Xmanager 2.0)
For XDMCP connection to Sun Solaris 8
1. XDM Configuration
# /usr/dt/bin/dtconfig -e [Enable]
2. Firewall (TCP/UDP Ports) Configuration
Open UDP port 177 from the PC to the remote host direction.
Open incoming TCP ports 6000~6010 from the remote host to your PC.
3. Reboot the remote host and start Xmanager.
=============================================================================================================================================================
For XDMCP connection to Sun Solaris 9
1. XDM Configuration
# /usr/dt/bin/dtconfig -e [Enable]
2. Firewall (TCP/UDP Ports) Configuration
Open UDP port 177 from the PC to the remote host direction.
Open incoming TCP ports 6000~6010 from the remote host to your PC.
3. Reboot the remote host and start Xmanager
=============================================================================================================================================================
For XDMCP connection to Sun Solaris 10
1. XDM Configuration
# /usr/dt/bin/dtconfig -e [Enable]
2. Firewall (TCP/UDP Ports) Configuration
Open UDP port 177 from the PC to the remote host direction.
Open incoming TCP ports 6000~6010 from the remote host to your PC.
3. Reboot the remote host and start Xmanager.
Like it on Facebook, Tweet it or share this article on other bookmarking websites.